The AMC515 is an AMC FPGA Carrier with an FMC (VITA 57) interface. The AMC515 is compliant to the AMC.1, AMC.2 and/or AMC.4 specification. The unit has an on-board, re-configurable FPGA which interfaces directly to the AMC Ports 4-11, FCLKA, TCLKA, TCLKB, TCLKC, and TCLKD. The FPGA has an interface to a bank of DDR3 memory (64-bit wide). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host. The AMC515 have ports 12-15 and 17-20 routed as LVDS. The module has a single FMC connector per VITA-57. This allows a wide variety of FMC I/O interfaces to be utilized within a system platform. The on-board PPC runs at 1.2GHz with 2GB of DDR3, 8Mbytes of boot Flash and up to 32GBytes of user Flash. The PPC has an x1 PCIe interface to the FPGA in addition to it’s local bus. The  PPC has dual GbE routed to ports 0 and 1 of the AMC as well as GbE to the FPGA. The AMC515 has Serial Over LAN per IPMI specification and a hardware RNG (Random Number Generator) for secure session.

Key Features

ØAMC FPGA carrier for FPGA Mezzanine Card (FMC) per VITA-57

ØXilinx Virtex-7 XC7V2000T in 1925 package

ØAMC Ports 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)

ØAMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD

ØOn board PLL for buffering/multiplying and jitter cleaner

ØOption for 2GB of DDR3 memory to FPGA

ØOn board Freescale QorIQ PPC2040 with 2 GB DDR-III

ØSerial Over LAN (SOL) with hardware RNG