• 产品参数
  • 产品详情
ATCA Storage Blade with RAID and iSCSI

The ATC605 is an AdvancedTCA Network Attached Storage Blade with an on-board Intel Xeon-D processor (8 core) and a high-performance hardware off load engine for iSCSI Target, with an integrated back-end RAID storage subsystem.

The ATC605 has a dual 100/40/10GbE to the Fabric channel.

An advanced ROC co-processor off-loads the main CPU. The ROC features include RAID levels 0, 1, 5 and 6 with RAID spans 10, 50 and 60. In addition, the ROC checks for consistency of background data integrity and patrol read for media scanning and repairing. The ROC has an optional battery pack to prevent data loss in the event of a power failure. The storage devices are NVMe style.

Auto resume after loss of system power during array rebuild or reconstruction, load balancing, check consistency for background data integrity. The RAID can bemanaged via a sophisticated GUI, running LSI MegaRAID software.

Key Features

  • Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network FileSystem (NFS) or Common Internet File System (CIFS)

  • Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)

  • Fully compliant with the IETF RFC3270 and RFC4171

  • RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack

  • Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6

  • RAID spans 10, 50 and 60

  • Battery pack option to prevent data loss

  • Utilizes VadaTech’s proven IPMI Management Controller