The VadaTech UTC012 is a 241/460W power module for use in a μTCA chassis. The power module runs at 84% efficiency when running at maximum load. This results in 200/400W (available to the system).  It is fully compliant with the MicroTCA.0 revision 1.0 specification; including dual-redundant I2C buses (IPMB-0).

The UTC012 is fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MCHs (MicroTCA Carrier Hubs) as well as the CUs. Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault. The firmware is upgradable via HPM.

• Wide array of power module options from VadaTech

• Modifiable to rugged conduction-cooled version

• Design utilizes proven VadaTech subcomponents and engineering techniques

• Electrical, mechanical, software, and system-level
  expertise in house

• Single module, full size module per AMC.0

• Dual 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option

• Support for power module redundancy and dual IPMI bus

• 32-bit RISC processor

• Two banks of 256K flash for redundancy

• Field upgradable

• IPMI 2.0 and HPM.1 compliant

• Without the presence of an MCH the modules can be turned on

• Menu driven software for ease of configuration

• Current measure for each module

• External as well as internal WDT